First of all, showers are divided into three types: handheld showers, overhead showers and side spray showers, and handheld, overhead and side sprays.
When consumers buy showers, they are naturally concerned about water conservation. The steel ball valve core used in the shower is equipped with an adjustable hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. The use of new technology not only saves water, but also does not affect the bathing. Comfort, under normal circumstances, a well-designed shower can save 50% of water compared to an ordinary shower.
In fact, for the shower, the way of water outlet directly affects the feeling of bathing. For the general and strong beam styles in the past, the five-stage massage shower on the market is more popular. It can adjust various strength modes such as strong, gentle, moderate, and mixed at will. It can be sprayed by massage, crushing, rotating, etc. to relax the body.
For the previous showers, most of the outlet holes are hidden inside, but most of the current showers have the outlet holes exposed to the outside. In view of the water quality characteristics of the north, the rubber-quality outlet holes are easier to clean, and they are not prone to scale formation. They usually take a bath. It is more convenient to clean at times. It can be scrubbed with hand or cloth. In addition, the water hole is prominent, and the shower will be more natural.
Let's talk about the installation height of the shower head. The installation height of the shower head can be divided into two types according to the type of shower head: According to relevant regulations, the center of the concealed shower wall concealed water outlet should be 2.1 meters from the ground, and the center of the shower switch should be 1.1 meters from the ground; The shower with lifting rod is generally defined by the surface of the shower, and the best distance is 2 meters. It should be noted that these data are only average data, and should be adjusted according to the height of the user during actual installation.
The concealed water pipe for the exposed shower switch is hot on the left and cold on the right. The center spacing should be 150cm. The concealed water outlet on the wall should be level with the tile surface, and the internal concealed water pipe should be perpendicular to the wall. After the shower is installed, it should be with the wall Face at a 90 degree angle. In addition, water pressure adjustment is also a key: under normal circumstances, the water pressure within 1.5 kg is most suitable for the use of the shower. Excessive water pressure will cause the shower to be violent, and the small shower cannot be used normally.